Final Operations, Adjustment of minimum for natural gas | Smeg A3

Instructions for the installer

4.FINAL OPERATIONS

After replacing the nozzles, reposition the flame-spreader crowns, the burner caps and the grids.

Following adjustment to a gas other than the preset one, replace the gas adjustment label fixed to the appliance with the one corresponding to the new gas. This label is in the packet together with the nozzles.

4.1Adjustment of minimum for natural gas

Light the burner and turn it to the minimum position . Extract the gas tap knob and turn the adjustment screw at the side of the tap rod until the correct minimum flame is achieved.

Replace the knob and check burner flame stability: (rapidly turning the knob from maximum to minimum position, the flame should not go out). Repeat the operation on all the gas taps.

4.2Regulation of minimum for LPG

For regulating the minimum with LPG, the screw at the side of the tap rod must be turned clockwise all the way.

The bypass diameters for each individual burner are shown in paragraph “3.2 Burner and nozzle characteristics table”. When adjustment is complete, re-seal the by-passes using wax or an equivalent material.

47

Image 9

Smeg A3 manual Final Operations, Adjustment of minimum for natural gas, Regulation of minimum for LPG

Contents

Contents Instructions for Safe and Proper USE Introduction Appliance is Designed for USE by ADULTS. do not Allow Positioning and levelling of the appliance Installation of the ApplianceElectrical connection This rating plate must never be removed Instructions for the installer Ventilation requirements Connecting to natural and LPG gas Changing nozzles Adaptation to Different Types of GAS Arrangement of burners on cooking hob Burner and nozzle characteristics tableLPG G30/G31 28/37 mbar Natural GAS G20 20 mbar Adjustment of minimum for natural gas Final OperationsRegulation of minimum for LPG Mounting the rear top upstand Cooking HOB Burner Command Knob Description of ControlsFront control panel Barbecue Element Power Regulator Knob Main Oven Thermostat KnobAuxiliary Oven Variable Grill Knob Auxiliary Oven Thermostat Knob Clock adjustment Electronic ProgrammerList of Functions Semiautomatic cooking Automatic cookingEnd of cooking Switching off the alarm Adjusting alarm volumeCancellation of set data Minute Counter Lighting of the cooking hob burners USE of the Cooking HOB Practical advice for using the cooking hob burners Using the griddle plateDiameter of containers USE of the Ovens Oven LightStorage compartment Accessories Accessories on Request Cooking Hints Function Switch Thermostat Selector Switch fromTraditional cooking main and auxiliary ovens To 250C Function Switch Thermostat Switch AT Maximum Function Switch Thermostat Selector Switch from 50 to 250CHot-air cooking main oven Grill cooking main oven Function Switch Thermostat Switch from 50 to 200C Hot-air grilling main ovenVariable grill cooking auxiliary oven Function Switch Thermostat Switch in Position Delicate cooking auxiliary ovenDefrosting main oven Spit cooking main oven Spit cooking auxiliary oven Function Switch Variable Grill Choice Between MIN ¾ MAX Recommended cooking table Traditional Cooking HOT-AIR Cooking Cleaning and Maintenance Cleaning stainless steelCleaning of cooking hob components Grids Barbecue drip tray Cleaning of ovens without self-cleaning panels Self-cleaning linersIgnition plugs and thermocouples Looking after the self-cleaning liners Using the self-cleaning linersAssembling the self-cleaning liners Door glass Replacement of light bulbs Extraordinary Maintenance Dismantling of the doors Oven door gasketsLubrication of gas taps