Instructions for the user
7.2Removing the door
Hinges with mobile connecting plates
Catch the door at the two sides with both hands in proximity to hinges C and lift up the small levers D. Raise the door to an angle of about 45° and remove it. To reassemble, fit the hinges C into their grooves, then lower the door into place and release the levers D.
Hinges with mobile levers
Open the door completely and take the door in both hands holding it at the sides close to the hinges. Push the levers A forwards with the thumb and lift the door upwards at the same time making an angle of about 45°, then remove the door. To replace, slide the hinges C into their grooves, and then open the door completely to unhook the sections B. At this stage the door can be closed normally.
7.3Oven door seal
To permit thorough cleaning of the oven, the seal may be removed. Before removing the seal, take off the door as described above. Once the door has been taken off, lift the tabs at the corners as shown in the figure.
34
