INSTRUCTION MANUAL
GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAM
Page
8523$167$1$5
RQWHQWVEN
RQWUROVWDQGDUG
RPSDUDWLYHSURJUDP
1. Safety and operating instructions
Safety instructions
USES OTHER THAN THOSE DESCRIBED ABOVE
NEVER BE REMOVED
DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS
Safety instructions
AQUASTOP MODELS
Safety instructions
APPLIANCE
2. Installation and hook-up
Installation instructions
Installation instructions
2.1 Water supply connection
CONNECTING TO THE WATER SUPPLY
DRAIN CONNECTION
Installation instructions
2.2 Electrical connection and precautions
NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD
IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD
WHEN CLEANING AND MAINTAINING THE APPLIANCE
Installation instructions
Fuse replacement
FOR GREAT BRITAIN ONLY
Instructions for the User
3. BEFORE USING AND SETTING UP YOUR APPLIANCE
3.1 Buzzer enabling
WATER HARDNESS TABLE
3.2 Water hardness
WATER HARDNESS
3.3 Language depending on model
4. Description of controls
D OPTION SELECTION BUTTON E OPTION SETTING BUTTON
4.1 The control panel
A ON/OFF KEY B PROGRAMME SELECTION BUTTON
Instructions for the User
5.1 SWITCHING ON
5. PROGRAMME SELECTION - introduction
Before starting a washing programme, check that
5.3 Rapid programming
5.4 Re-using last programme used
Instructions for the User
Instructions for the User
5.5 Standard programmes
Instructions for the User
6. PROGRAMME TABLE
NUMBER AND
LOADING DISHES
7.2 INTERRUPTING A PROGRAMME
7. SPECIAL PROGRAMME FEATURES
Instructions for the User
7.4 STOPPING A PROGRAMME
7.3 CHANGING THE PROGRAMME
END OF PROGRAMME
REMOVING THE DISHES
Shown on DISPLAY G Delayed Hours 0, 1, .....12/24”
6.1 DELAYED START depending on model
6. OPTIONS available in all programmes except the soak programme
Button D
Shown on DISPLAY G Half Load Off/Top/Bottom”
8.2 HALF-LOAD WASH depending on model
8.3 USE OF 3/1 PRODUCTS OPTION depending on model
Shown on DISPLAY G Detergent Norm/3/1”
TO REDUCE DETERGENT CONSUMPTION AND PROTECT THE ENVIRONMENT
TO SAVE ENERGY AND PROTECT THE ENVIRONMENT
Instructions for the User
User instructions
9.1 Using the water softening system
9. Operating instructions
User instructions
9.2 Using the rinse aid and detergent dispensers
User instructions
ADJUSTING THE RINSE AID DISPENSER SETTING
ADDING THE RINSE AID
ADDING THE DETERGENT
User instructions
During the washing cycle, the dispenser will be opened automatically
3/1 Products
User instructions
User instructions
9.3 General warnings and recommendations
Correct loading of the dishes helps ensure optimal washing results
MAKE SURE that the items being washed are dishwasher-safe
Items which are not dishwasher-safe
User instructions
Dishes and objects in copper, tin, zinc or brass these tend to stain
User instructions
9.4 Using the baskets
EN 50242 STANDARD LOADS FOR CERTIFICATION BODIES
EN 50242 cycle test conditions
LOADING THE LOWER BASKET
User instructions
Loading examples ½ LOAD
CUTLERY BASKET
User instructions
UPPER BASKET
User instructions
LOADING THE UPPER BASKET
User instructions
ADJUSTING THE UPPER BASKET
10.1 General warnings and recommendations
10. Cleaning and maintenance
CLEANING THE WATER INTAKE FILTER
CLEANING THE SPRAY ARMS
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE
CLEANING THE FILTER UNIT
User instructions
PROLONGED DISUSE
If the dishes are not being cleaned properly, check that
TROUBLESHOOTING MINOR PROBLEMS
User instructions
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE
If the dishes fail to dry or remain dull, check that
User instructions
If the dishes show signs of streaking, staining, etc., check that
If there are visible traces of rust inside the tank
Safety device tripped
11. Troubleshooting
Temperature sensor k.o
TABLE OF MALFUNCTIONS DETECTED BY THE AUTODIAGNOSIS SYSTEM
MALFUNCTION - DESCRIPTION
Level pressure switch k.o
If the malfunction persists, contact your authorised Service Centre
Instructions for the User
12 Standard place settings
TECHNICAL DATA
Electrical characteristics
User instructions
Page
Page
19 590 1216