GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAM
INSTRUCTION MANUAL
Page
RQWUROVWDQGDUG
RQWHQWVEN
8523$167$1$5
RPSDUDWLYHSURJUDP
USES OTHER THAN THOSE DESCRIBED ABOVE
Safety instructions
1. Safety and operating instructions
NEVER BE REMOVED
Safety instructions
DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS
APPLIANCE
Safety instructions
AQUASTOP MODELS
Installation instructions
2. Installation and hook-up
CONNECTING TO THE WATER SUPPLY
2.1 Water supply connection
Installation instructions
DRAIN CONNECTION
NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD
2.2 Electrical connection and precautions
Installation instructions
IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD
Fuse replacement
Installation instructions
WHEN CLEANING AND MAINTAINING THE APPLIANCE
FOR GREAT BRITAIN ONLY
3.1 Buzzer enabling
3. BEFORE USING AND SETTING UP YOUR APPLIANCE
Instructions for the User
WATER HARDNESS
3.2 Water hardness
WATER HARDNESS TABLE
3.3 Language depending on model
4.1 The control panel
D OPTION SELECTION BUTTON E OPTION SETTING BUTTON
4. Description of controls
A ON/OFF KEY B PROGRAMME SELECTION BUTTON
5. PROGRAMME SELECTION - introduction
5.1 SWITCHING ON
Instructions for the User
Before starting a washing programme, check that
Instructions for the User
5.4 Re-using last programme used
5.3 Rapid programming
5.5 Standard programmes
Instructions for the User
NUMBER AND
6. PROGRAMME TABLE
Instructions for the User
LOADING DISHES
Instructions for the User
7. SPECIAL PROGRAMME FEATURES
7.2 INTERRUPTING A PROGRAMME
END OF PROGRAMME
7.3 CHANGING THE PROGRAMME
7.4 STOPPING A PROGRAMME
REMOVING THE DISHES
6. OPTIONS available in all programmes except the soak programme
6.1 DELAYED START depending on model
Shown on DISPLAY G Delayed Hours 0, 1, .....12/24”
Button D
8.3 USE OF 3/1 PRODUCTS OPTION depending on model
8.2 HALF-LOAD WASH depending on model
Shown on DISPLAY G Half Load Off/Top/Bottom”
Shown on DISPLAY G Detergent Norm/3/1”
Instructions for the User
TO SAVE ENERGY AND PROTECT THE ENVIRONMENT
TO REDUCE DETERGENT CONSUMPTION AND PROTECT THE ENVIRONMENT
9. Operating instructions
9.1 Using the water softening system
User instructions
9.2 Using the rinse aid and detergent dispensers
User instructions
ADDING THE RINSE AID
ADJUSTING THE RINSE AID DISPENSER SETTING
User instructions
During the washing cycle, the dispenser will be opened automatically
User instructions
ADDING THE DETERGENT
User instructions
3/1 Products
Correct loading of the dishes helps ensure optimal washing results
9.3 General warnings and recommendations
User instructions
MAKE SURE that the items being washed are dishwasher-safe
Dishes and objects in copper, tin, zinc or brass these tend to stain
User instructions
Items which are not dishwasher-safe
EN 50242 STANDARD LOADS FOR CERTIFICATION BODIES
9.4 Using the baskets
User instructions
EN 50242 cycle test conditions
Loading examples ½ LOAD
User instructions
LOADING THE LOWER BASKET
User instructions
CUTLERY BASKET
LOADING THE UPPER BASKET
User instructions
UPPER BASKET
ADJUSTING THE UPPER BASKET
User instructions
CLEANING THE WATER INTAKE FILTER
10. Cleaning and maintenance
10.1 General warnings and recommendations
CLEANING THE SPRAY ARMS
User instructions
CLEANING THE FILTER UNIT
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE
PROLONGED DISUSE
User instructions
TROUBLESHOOTING MINOR PROBLEMS
If the dishes are not being cleaned properly, check that
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE
If the dishes show signs of streaking, staining, etc., check that
User instructions
If the dishes fail to dry or remain dull, check that
If there are visible traces of rust inside the tank
Temperature sensor k.o
11. Troubleshooting
Safety device tripped
TABLE OF MALFUNCTIONS DETECTED BY THE AUTODIAGNOSIS SYSTEM
If the malfunction persists, contact your authorised Service Centre
Level pressure switch k.o
MALFUNCTION - DESCRIPTION
Instructions for the User
Electrical characteristics
TECHNICAL DATA
12 Standard place settings
User instructions
Page
Page
19 590 1216