Smeg DI614H Special Programme Features, Interrupting A Programme, Instructions for the User

EN Instructions for the User

7. SPECIAL PROGRAMME FEATURES

The top line displays the temperature in the tank, alternating (every 4 seconds) with the programme being performed and the current programme stage.

The bottom line will show the programme duration “Duration

XXminutes”, where XX is the time left before the end of the programme, in minutes.

7.1 If DELAYED START (C) is set, until the programme starts the second line shows the message “Start in YY hh/mm”, where YY are the hours (from 1-12/1-24depending on model) or minutes (when less than 1 hour) left before the programme starts.

Any warning messages (e.g. "No salt”) will appear on the DISPLAY

(G)during the washing stage, alternating with the time left to the end of the programme.

If the function 3/1 PRODUCTS function (only available on some models) is set, the no salt and no rinse aid warning messages do not appear.

7.2 INTERRUPTING A PROGRAMME

To interrupt a programme, press the START/PAUSE button (F) again and keep it pressed until “Pause” appears on the bottom line of the DISPLAY (G).

To restart the programme, repeat this operation until "Duration XX min” reappears on the bottom line of the display.

Opening the door also cuts out the programme in progress, but this is not recommended, since water splashes or gusts of steam might escape. When the door is closed the programme restarts automatically, even it was interrupted by pressing the START/PAUSE button (F).

18