GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAM
INSTRUCTION MANUAL
Page
RQWHQWVEN
8523$167$1$5
RQWUROVWDQGDUG
RPSDUDWLYHSURJUDP
Safety instructions
1. Safety and operating instructions
USES OTHER THAN THOSE DESCRIBED ABOVE
NEVER BE REMOVED
Safety instructions
DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS
APPLIANCE
Safety instructions
AQUASTOP MODELS
Installation instructions
2. Installation and hook-up
2.1 Water supply connection
Installation instructions
CONNECTING TO THE WATER SUPPLY
DRAIN CONNECTION
2.2 Electrical connection and precautions
Installation instructions
NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD
IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD
Installation instructions
WHEN CLEANING AND MAINTAINING THE APPLIANCE
Fuse replacement
FOR GREAT BRITAIN ONLY
3.1 Buzzer enabling
3. BEFORE USING AND SETTING UP YOUR APPLIANCE
Instructions for the User
3.2 Water hardness
WATER HARDNESS TABLE
WATER HARDNESS
3.3 Language depending on model
D OPTION SELECTION BUTTON E OPTION SETTING BUTTON
4. Description of controls
4.1 The control panel
A ON/OFF KEY B PROGRAMME SELECTION BUTTON
5.1 SWITCHING ON
Instructions for the User
5. PROGRAMME SELECTION - introduction
Before starting a washing programme, check that
Instructions for the User
5.4 Re-using last programme used
5.3 Rapid programming
5.5 Standard programmes
Instructions for the User
6. PROGRAMME TABLE
Instructions for the User
NUMBER AND
LOADING DISHES
Instructions for the User
7. SPECIAL PROGRAMME FEATURES
7.2 INTERRUPTING A PROGRAMME
7.3 CHANGING THE PROGRAMME
7.4 STOPPING A PROGRAMME
END OF PROGRAMME
REMOVING THE DISHES
6.1 DELAYED START depending on model
Shown on DISPLAY G Delayed Hours 0, 1, .....12/24”
6. OPTIONS available in all programmes except the soak programme
Button D
8.2 HALF-LOAD WASH depending on model
Shown on DISPLAY G Half Load Off/Top/Bottom”
8.3 USE OF 3/1 PRODUCTS OPTION depending on model
Shown on DISPLAY G Detergent Norm/3/1”
Instructions for the User
TO SAVE ENERGY AND PROTECT THE ENVIRONMENT
TO REDUCE DETERGENT CONSUMPTION AND PROTECT THE ENVIRONMENT
9. Operating instructions
9.1 Using the water softening system
User instructions
9.2 Using the rinse aid and detergent dispensers
User instructions
ADDING THE RINSE AID
ADJUSTING THE RINSE AID DISPENSER SETTING
User instructions
During the washing cycle, the dispenser will be opened automatically
User instructions
ADDING THE DETERGENT
User instructions
3/1 Products
9.3 General warnings and recommendations
User instructions
Correct loading of the dishes helps ensure optimal washing results
MAKE SURE that the items being washed are dishwasher-safe
Dishes and objects in copper, tin, zinc or brass these tend to stain
User instructions
Items which are not dishwasher-safe
9.4 Using the baskets
User instructions
EN 50242 STANDARD LOADS FOR CERTIFICATION BODIES
EN 50242 cycle test conditions
Loading examples ½ LOAD
User instructions
LOADING THE LOWER BASKET
User instructions
CUTLERY BASKET
LOADING THE UPPER BASKET
User instructions
UPPER BASKET
ADJUSTING THE UPPER BASKET
User instructions
10. Cleaning and maintenance
10.1 General warnings and recommendations
CLEANING THE WATER INTAKE FILTER
CLEANING THE SPRAY ARMS
CLEANING THE FILTER UNIT
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE
User instructions
PROLONGED DISUSE
TROUBLESHOOTING MINOR PROBLEMS
If the dishes are not being cleaned properly, check that
User instructions
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE
User instructions
If the dishes fail to dry or remain dull, check that
If the dishes show signs of streaking, staining, etc., check that
If there are visible traces of rust inside the tank
11. Troubleshooting
Safety device tripped
Temperature sensor k.o
TABLE OF MALFUNCTIONS DETECTED BY THE AUTODIAGNOSIS SYSTEM
Level pressure switch k.o
MALFUNCTION - DESCRIPTION
If the malfunction persists, contact your authorised Service Centre
Instructions for the User
TECHNICAL DATA
12 Standard place settings
Electrical characteristics
User instructions
Page
Page
19 590 1216
