Smeg DUCO4SS manual Electronic Analogue Clock Only On Some Models, Instructions for the user

Instructions for the user

5.ELECTRONIC ANALOGUE CLOCK (ONLY ON SOME MODELS)

The programmer user instructions are valid only for the large oven.

LIST OF FUNCTIONS

MINUTE-MINDER BUTTON

AUTOMATIC DURATION / AUTOMATIC STAR TIME BUTTON

TIME SETTING AND RESET

DECREASE TIME BUTTON

INCREASE TIME BUTTON

5.1.0Setting the time

When the oven is used for the first time, or after a power failure, the display flashes on and off at regular intervals. Press the key for 1 to 2 seconds to stop the display flashing and start setting of the current time. Press the or keys to increase or decrease by one minute each time a key is pressed.

Press one of the two value modification keys until the current time appears. The clock will start from the time set 6/7 seconds after the last key is pressed.

At the end of each programmed cooking operation, an intermitant alarm will sound 3 to 4 times at intervals of about 1 and a half minutes. The beeps can be stopped at any moment by pressing any key.

5.1.1Minute-minder

This function does not stop cooking but just triggers the alarm.

-When the key is pressed the display illuminates, appearing as shown in figure 1;

-Press the or keys within 6 to 7 seconds to set the minute-minder. Whenever a key is pressed, 1 outside segment, representing 1 cooking minute will light up (figure 2 shows 10 cooking minutes).

-The countdown will start 6 to 7 seconds after the last key is pressed; at the end of it, you will hear the alarm.

-During cooking with countdown, the current time can be displayed by pressing the key once; press again to return to the minute-minder display.

-At the end of the countdown, the oven has to be switched off by hand, by turning the thermostat and the function selector to 0.

1

2

7