Smeg LSPX1253 manual Bio, Setting the Washing Program

User instructions

SETTING THE WASHING PROGRAM

To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.

PROGRAM	SELECTION	TYPE AND GRADE DIRT	PROGRESS	DURATION	CONSUMPTION
			PROGRAM	MINUTES	WATER	POWER
				(2)	LITRES (1)	KWh (2)

SOAK

LIGHT

BIO

(*)

NORMAL

ULTRA CLEAN

Bio

PANS AND DISHES
IN WAITING OF	Cold prewash	15'	6	0,03
COMPLETING
THE LOAD
	Wash at 45°C
DISHES	Cold rinse	70'	15	1,15
NOT VERY DIRTY	Rinse at 68°C
	Dry
PANS AND DISHES	Cold prewash
	Wash at 50°C	180'	15	1,05
NOT VERY DIRTY BUT	Rinse at 64°C
WITH DRY RESIDUALS
	Dry
	Cold prewash
PANS AND DISHES	Wash at 65°C	100'	20	1,40
DIRTY AND WITH	Cold rinse
DRY RESIDUALS	Rinse at 68°C
	Dry
	Prewash at 45°C
	Wash at 70°C
PANS AND DISHES
VERY DIRTY AND	2 cold rinses	115'	24	1,77
WITH DRY RESIDUALS	Rinse at 70°C

Dry

Only run the soak program with half loads.

The HALF LOAD option (10) - 3/1 (8) is available for all programs except the soak program.

(*) Reference program as per EN 50242 standard.

(1)Average power consumption with the softener set on level 2.

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

The "ULTRA CLEAN" program terminates with an anti-bacteria rinse that ensures a further reduction in the bacteria level

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

10