Smeg LSPX1253 manual User instructions, Before Starting The Dishwasher After Prolonged Disuse

Models: LSPX1253

1 34
Download 34 pages 47.67 Kb
Page 30
Image 30
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:

User instructions

BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:

ξCheck that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes.

ξPlug the power cord back into the socket.

ξReconnect the water intake hose and open the tap again.

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the following instructions:

If the program fails to start, check that:

ξthe dishwasher is connected to the electrical power supply;

ξthere is no power failure;

ξthe water tap is open;

ξthe dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

ξthe drain hose is not kinked;

ξthe drain siphon is not obstructed;

ξthe dishwasher filters are not clogged.

If the dishes are not being cleaned properly, check that:

ξthe correct amount of detergent has been added;

ξthere is regenerating salt inside the special container;

ξthe dishes are being loaded correctly;

ξthe selected program is suitable for the dish types and their degree of soiling;

ξall the filters are clean and positioned correctly;

ξthe spray arm nozzles are not obstructed;

ξthere is no object obstructing the rotation of the spray arms.

29

Page 30
Image 30
Smeg LSPX1253 User instructions, Before Starting The Dishwasher After Prolonged Disuse, Troubleshooting Minor Problems