Contents | Smeg LSPX1253 specification

Contents

1.Safety and operating instructions _________________________ 2

2.Installation and hook-up_________________________________ 5

3.Description of the controls _______________________________ 9

4.Operating instructions __________________________________ 16

5.Cleaning and maintenance ______________________________ 27

6.Troubleshooting _______________________________________ 31

Thank you for choosing one of our products.

You are advised to read this manual carefully; it contains all the information you need about the right conditions for the proper, safe use of your dishwasher.

The individual sections are laid out to provide you with a step-by-step guide to all your appliance's functions; the texts are easy to understand and are complete with detailed illustrations.

Recommendations are given for the correct use of the baskets, spray arms, containers, filters, washing programs, and for operating the controls.

Following the cleaning instructions provided here will keep your dishwasher's performance at peak levels in the long term.

This user-friendly manual will provide answers to all your questions about use of the dishwasher.

INSTALLATION INSTRUCTIONS: these are intended for the qualified technician who must carry out the installation, hook-up and testing of the appliance.

USER INSTRUCTIONS: these consist of recommendations for using the appliance, a description of its controls and of the correct cleaning and maintenance procedures.

1

Image 2

Smeg LSPX1253 manual Contents

Contents

Guide for Using the Dishwasher and the Washing Programs Contents Safety instructions Safety and operating instructions Safety instructions Aquastop Models Installation and hook-up For free-standing models only Drain Connection Connecting to the Water SupplyWater supply connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply Cord For Great Britain only When Cleaning and Maintaining the ApplianceFuse replacement Description of the controls Front panel Setting the Washing Program Bio Correct amount of detergent has been added to the dispenser Washing programsBefore starting a washing program make sure that Programming Selecting Half Load Wash on some models only Cancelling the Current ProgramChanging the Program Available in all programs except the soak program Delaying the ProgramPress the Program Delay button 6 again the 3-FIGURE Display Option Button To Save on ENERGY! … and Protect the Environment Removing the Dishes Starting the DishwasherEND Program Using the water softening system Operating instructions User instructions Using the rinse aid and detergent dispensers Water Hardness Table Adjusting the Rinse AID Dispenser Setting Adding the Rinse AID Adding the Detergent General warnings and recommendations Products User instructions Loading the Lower Basket Using the basketsLower Basket Cutlery Basket Upper Basket Adjusting the Upper Basket Loading the Upper Basket Version B Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Avoid the use of acidic or abrasive detergents Cleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tap If the program fails to start, check that If the dishes are not being cleaned properly, check thatReconnect the water intake hose and open the tap again If water remains inside the dishwasher, check that If the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tank Troubleshooting Technical Data 135 145