Loading the Upper Basket | Smeg LSPX1253 instruction

User instructions

LOADING THE UPPER BASKET

Load plates facing forward; cups, bowls etc. must always be facing downwards. The left-hand side of the basket can be loaded with two layers of cups and glasses. The centre can be filled with plates and side- plates, fitted upright into the supports provided.

Loading examples:

1/2 LOAD

ADJUSTING THE UPPER BASKET

Version A: the upper basket can be adjusted in two positions, according to the user’s needs and according to the height of the dishes in the lower basket. Proceed as follows:

pull out the right-hand basket guide;

remove the stop, first releasing it as shown in the diagram;

push the guide to free the wheels;

fit the upper or lower pair of wheels into the guide, depending on the setting required;

return the stop to its original position.

25

Image 26

Smeg LSPX1253 manual Loading the Upper Basket, Adjusting the Upper Basket

Contents

Guide for Using the Dishwasher and the Washing Programs Contents Safety instructions Safety and operating instructions Safety instructions Aquastop Models Installation and hook-up For free-standing models only Drain Connection Connecting to the Water SupplyWater supply connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply Cord For Great Britain only When Cleaning and Maintaining the ApplianceFuse replacement Description of the controls Front panel Setting the Washing Program Bio Correct amount of detergent has been added to the dispenser Washing programsBefore starting a washing program make sure that Programming Selecting Half Load Wash on some models only Cancelling the Current ProgramChanging the Program Available in all programs except the soak program Delaying the ProgramPress the Program Delay button 6 again the 3-FIGURE Display Option Button To Save on ENERGY! … and Protect the Environment Removing the Dishes Starting the DishwasherEND Program Using the water softening system Operating instructions User instructions Using the rinse aid and detergent dispensers Water Hardness Table Adjusting the Rinse AID Dispenser Setting Adding the Rinse AID Adding the Detergent General warnings and recommendations Products User instructions Loading the Lower Basket Using the basketsLower Basket Cutlery Basket Upper Basket Adjusting the Upper Basket Loading the Upper Basket Version B Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Avoid the use of acidic or abrasive detergents Cleaning the Filter Unit Fill the rinse aid dispenser Shut off the water supply tap If the program fails to start, check that If the dishes are not being cleaned properly, check thatReconnect the water intake hose and open the tap again If water remains inside the dishwasher, check that If the dishes fail to dry or remain dull, check that If there are visible traces of rust inside the tank Troubleshooting Technical Data 135 145