Smeg SA130P manual Extraordinary Maintenance, Changing the light bulb, Removing the door

Instructions for the User

14.EXTRAORDINARY MAINTENANCE

Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind are provided below.

Before carrying out any operation involving access to live parts, disconnect the appliance from the electricity supply.

14.1 Changing the light bulb

Remove the protective cover A by unscrewing it anticlockwise and replace the bulb B with another of the same type. Replace the protective cover A.

Use only light bulbs approved for ovens (T 300°C).

14.2 Removing the door

14.2.1 With mobile levers of type 1

With the door completely open, lift the levers A until they touch the hinges B and take hold of the two sides of the door with both hands close to the hinges. Raise the door to an angle of about 45° and remove it. If the hinges have not locked, repeat the operation, raising the levers A and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then lower the door into place, ensuring that it remains fitted into the grooves C, then lower the levers A.

14.2.2 With mobile levers of type 2

Lift the levers B and take hold of the two sides of the door with both hands close to the hinges A.

Raise the door to an angle of about 45° and remove it. To reassemble, fit the hinges A into their grooves, then lower the door into place and engage the levers B.

14.2.3 Removing doors with pins

1)

2)

Open the door completely and insert the pins (supplied) into the holes from the inside. Close the door to an angle of about 45° and lift it off. To reassemble, fit the hinges into their grooves, then lower the door into place and extract the pins.

26