Instructions for the installer, Measurements | Smeg SA561X-9

Instructions for the installer

When installing in tall units, comply with the dimensions shown in figures 1 and 2, bearing in mind that the top/rear of the unit must have an opening 35-40 mm deep.

Remove the screw covers on the frame and screw in the 2 screws A (fig. 5) to fix the appliance to the unit. Replace the screw covers. For installing beneath a countertop hob, allow for a rear and bottom clearance as shown in Figure 1 (ref. F).

See the relevant instructions for fitting and securing the appliance.

FIG.1

Measurements

(mm)

50

A

583 ÷ 585

B

554 ÷ 564

C

490 ÷ 500

D

560 min.

E

35 ÷ 40

Image 49

Smeg SA561X-9 installation instructions Instructions for the installer, Measurements

Contents

SA561X-9 Contents Instructions for USE General instructions General instructions Safety Precautions General instructions Environmental Responsibility Instructions for disposal Multifunction Pyrolytic GET to Know Your Oven Some models are not provided with all Available Accessories Using the support rack Using the rack or trayMechanical lock must always face the back of the oven Using the handle Using the rotisserie rod on some models only General Description Oven runners Using the OvenOvens with frames Ovens with runners Oven inside lights Cooling system Instructions for the User Oven Thermostat Knob Description of the controls on the front panel Instructions for the User Instructions for the User Function Knob Using the timer Setting the timeElectronic programmer on some models only Semi-automatic cooking Stopping the buzzerAutomatic cooking End of semi-automatic / automatic cooking Adjusting the buzzer volumeDeleting the set data Modifying the set data ECO Cooking with the Oven FAN-ASSISTED Grill Advice for cooking meat Cooking advice and instructionsAdvice for cooking desserts and biscuits Advice for defrosting and proving To save energy Advice for cooking with the Grill and the Fan-assisted grill Meat Cooking process information table 1ST Surface 2ND Surface Pizza 280 190 180 160 170 150 On pyrolytic models only Proving and defrosting functionsProving Quantity Cleaning stainless steel Cleaning and MaintenanceOrdinary daily cleaning Cleaning the door glazing Cleaning the inside of the oven Ovens with runners Removing guide frames Pyrolysis automatic oven cleaning on some models only Cleaning Light Dirt Medium Dirt Heavy Dirt Duration Before starting the automatic cleaning cycle To select a cleaning cycle with a delayed start Setting the cleaning cycle Before starting the assisted cleaning cycle Vapor Clean assisted oven cleaning on some models only Setting the assisted cleaning cycle End of the assisted cleaning cycle Replacing the light bulb Extraordinary MaintenanceOn some models only the bulbs are Directly with your fingers, wrap them With moveable levers Removing the door With pins Removing the internal glass panels Removing the door sealFor multifunction models only Removing the internal glass panel CleaningRemoving the middle glass panels pyrolytic models Multifunction models Cable replacement Installing the ApplianceElectrical connection Do not remove this plate for any reason Positioning the oven Measurements Instructions for the installer Instructions for the installer Page Page 914773682/ B