Using the rotisserie rod on some models only | Smeg SA561X-9

Instructions for the User

5.4Using the rotisserie rod (on some models only)

When cooking with the rotisserie, position the frame on the third runner (see

6.2.1Oven runners). Once the frame is inserted, the shaped part must sit facing outwards (as shown in the illustration).

Then prepare the rotisserie rod with the food, using the clip forks provided.

So that you can handle the rod with the food on it readily, screw on the handle provided.

Ovens with framesOvens with runners

Having prepared the rotisserie rod with the food, position it on the guide frame as shown in the illustration.

Insert the rod into the hole (detail B) so that it connects with the rotisserie motor. Make sure that the pin is placed correctly on the guide frame (detail A).

Ovens with frames

Ovens with runners

13

Image 12

Smeg SA561X-9 installation instructions Using the rotisserie rod on some models only

Contents

SA561X-9 Contents General instructions Instructions for USE General instructions Safety Precautions General instructions Instructions for disposal Environmental Responsibility GET to Know Your Oven Multifunction Pyrolytic Available Accessories Some models are not provided with all Using the rack or tray Using the support rackMechanical lock must always face the back of the oven Using the handle Using the rotisserie rod on some models only Using the Oven General Description Oven runnersOvens with frames Ovens with runners Cooling system Oven inside lights Instructions for the User Description of the controls on the front panel Oven Thermostat Knob Instructions for the User Instructions for the User Function Knob Setting the time Using the timerElectronic programmer on some models only Stopping the buzzer Semi-automatic cookingAutomatic cooking Adjusting the buzzer volume End of semi-automatic / automatic cookingDeleting the set data Modifying the set data Cooking with the Oven ECO FAN-ASSISTED Grill Cooking advice and instructions Advice for cooking meatAdvice for cooking desserts and biscuits Advice for defrosting and proving Advice for cooking with the Grill and the Fan-assisted grill To save energy Cooking process information table Meat 1ST Surface 2ND Surface Pizza 280 190 180 160 170 150 Proving and defrosting functions On pyrolytic models onlyProving Quantity Cleaning and Maintenance Cleaning stainless steelOrdinary daily cleaning Cleaning the door glazing Cleaning the inside of the oven Ovens with runners Removing guide frames Pyrolysis automatic oven cleaning on some models only Before starting the automatic cleaning cycle Cleaning Light Dirt Medium Dirt Heavy Dirt Duration Setting the cleaning cycle To select a cleaning cycle with a delayed start Vapor Clean assisted oven cleaning on some models only Before starting the assisted cleaning cycle Setting the assisted cleaning cycle End of the assisted cleaning cycle Extraordinary Maintenance Replacing the light bulbOn some models only the bulbs are Directly with your fingers, wrap them Removing the door With moveable levers With pins Removing the door seal Removing the internal glass panelsFor multifunction models only Cleaning Removing the internal glass panelRemoving the middle glass panels pyrolytic models Multifunction models Installing the Appliance Cable replacementElectrical connection Do not remove this plate for any reason Positioning the oven Instructions for the installer Measurements Instructions for the installer Page Page 914773682/ B