Instructions for the user
7.7Programmed cooking procedures
7.7.1 Semiautomatic cooking
Semiautomatic cooking is the function which allows a cooking operation to be started and then ended after a specific length of time set by the user.
Select a function (see paragraph “7.6 Selecting a function”) and press PT1
twice. The display will show the 
figures and the 
symbol (flashing).
Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to
23:59). A few seconds after the required duration is set, the 
symbol will stop flashing, and semiautomatic cooking will start from that moment. At the end, the word STOP will appear on DSP1, cooking will stop and a buzzer will sound; press PT1 to deactivate it.
If you wish to continue cooking beyond the set time, press PT1 again. The oven will restart normal operation with the cooking settings selected previously. PT2 has to be pressed to switch the oven off completely.
Modifying the data set
Once semiautomatic cooking has started, its duration can be changed.
When the 
symbol is steady and cooking is in progress, press PT1 once. The 
symbol starts flashing and PT1 can be turned to change the
set duration. A few seconds after the last change, the 
symbol will stop flashing, and semiautomatic cooking will restart from the new value.
To change the preset temperature, wait for the 
symbol to become steady and turn PT1 to the right or left to increase or decrease the cooking temperature.
52
