USA
Instructions for the User
9.3.10Defrost by Time function 
After selecting this function press PT1 to set the parameters and the
duration light 
starts to blink.Turn PT1 to the right or left to change the preset defrosting duration.
Press PT2 to start the defrosting process.
The microwaves power will be automatically varied to achieve the best thawing results.
9.3.11Defrost by Weight function 
After selecting this function press PT1 to set the parameters and the
duration light 
starts to blink.Turn PT1 to the right or left to change the preset food type displayed on DSP1.
Press PT1 to validate and the weight light 
starts to blink. Turn PT1 to the right or left to change the preset food weight. Press PT2 to start the defrosting process.
The defrosting time will be calculated based on the food’s type and weight and the microwaves power will be automatically varied to achieve the best thawing results.
The following table shows the defrosting by weight function programmes, indicating weight intervals, and defrosting and standing times (in order to ensure the food is of a uniform temperature).
| PROGRAMME |
| FOOD |
| WEIGHT (oz) |
| TIME (MIN) |
| STANDING |
|
|
|
|
|
|
| |||||
|
|
|
|
| ||||||
|
|
|
|
| TIME (MIN) |
| ||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| PR 01 |
| MEAT |
| 3,5 – 70,5 |
| 2 – 43 |
| 20 – 30 |
|
|
|
|
|
|
|
|
|
|
|
|
| PR 02 |
| POULTRY |
| 3,5 – 88 |
| 2 – 58 |
| 20 – 30 |
|
|
|
|
|
|
|
|
|
|
|
|
| PR 03 |
| FISH |
| 3,5 – 88 |
| 2 – 40 |
| 20 – 30 |
|
|
|
|
|
|
|
|
|
|
|
|
| PR 04 |
| FRUIT |
| 3,5 – 18 |
| 2 – 13 |
| 10 – 20 |
|
|
|
|
|
|
|
|
|
|
|
|
| PR 05 |
| BREAD |
| 3,5 – 28 |
| 2 – 19 |
| 10 – 20 |
|
9.3.12Pizza function 
After selecting this function press PT1 to set the parameters and the
duration light 
starts to blink. The weight light 
starts to blink. Turn PT1 to the right or left to change the preset Pizza weight.
Press PT2 to start the cooking process.
9.3.13Delayed Start Time (Automatic cooking)
When PT1 is pressed to define a delayed start time the corresponding
light 
starts to blink, DSP1 shows the current time and DSP 2 shows “Auto”.
Turn PT1 to the right or left to change the delayed start time. Press PT2 to validate the delayed start time.
The oven enters in an idle state waiting for the defined start time. DSP3 shows the selected function and DSP1 and DSP2 show all the defined parameters for the function continuously alternating.
If you wish to start the function before the selected time, just press PT2. If you wish to cancel the programming, press PT2 for 3 seconds.
17
