USA
Instructions for the Installer
14 INSTALLING THE APPLIANCE
14.1 Electrical connection
The nameplate with the technical data, serial number and mark is in a visible position on the oven door frame.
The nameplate must never be removed.
The appliance must be connected to earth in compliance with electrical system safety regulations.
If a permanent connection is used, the appliance's power supply line must be fitted with an omnipolar breaking device with contact gap of at least 3 mm, located in an easily accessible position close to the appliance itself.
If a socket and plug connection is used, check that they are of the same type. Do not use reducers, adapters or junctions since they may cause overheating or burns.
37
