14 7.35 R TREADMILL
ASSEMBLY – PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.
STEP 1: Assemble the Console Support Tube
When attaching the right upright (310) first attach the 8 pin data cable to the
wire in the upright. This will allow you to pull the data cable up through the
upright after installation.
(1) Attach the Left (311) console support tube (wrapped in clear plastic) and
Right (310) console support tube (wrapped in green shaded plastic) to the
treadmill main frame with eight M8 x 15mm Allen Head Bolts (306) and eight
M8 Flat Washers (313) HAND TIGHTEN ONLY.
(2) Slide the base frame covers over uprights Do not fasten until after you
complete STEP 3.
306 X8 313 X8 Bolts should be hand tight only
Green plastic wrap
Clear plastic wrap