SMSC LAN8710, LAN8710i, MII 10/100, RMII 10/100 3.3Management Signals, 3.4General Signals, 3.510/100 Line Interface Signals

MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and flexPWR® Technology in a Small Footprint

Datasheet

Table 3.3 LED Signals 32-QFN (continued)

SIGNAL	32-QFN
NAME	PIN #	TYPE	DESCRIPTION
LED2/	2	IOPU	LED2 – Link Speed LED Indication.
nINTSEL			See Section 5.3.7 for a description of LED modes.
			nINTSEL: On power-up or external reset, the mode of the nINT/TXER/TXD4
			pin is selected.
			„ When LED2/nINTSEL is floated or pulled to VDDIO, nINT is selected for
			operation on pin nINT/TXER/TXD4 (default).
			„ When LED2/nINTSEL is pulled low to VSS through a resistor, TXER/TXD4
			is selected for operation on pin nINT/TXER/TXD4.
			„ See Section 4.10 for additional information.

3.3Management Signals

			Table 3.4 Management Signals 32-QFN
SIGNAL	32-QFN
NAME	PIN #	TYPE	DESCRIPTION
MDIO	16	IOD8	Management Data Input/OUTPUT: Serial management data input/output.
MDC	17	I8	Management Clock: Serial management clock.

3.4General Signals

			Table 3.5 General Signals 32-QFN
SIGNAL	32-QFN
NAME	PIN #	TYPE	DESCRIPTION
XTAL1/	5	ICLK	Clock Input: Crystal connection or external clock input.
CLKIN
XTAL2	4	OCLK	Clock Output: Crystal connection.
			Float this pin when an external clock is driven to XTAL1/CLKIN.
nRST	19	IOPU	External Reset: Input of the system reset. This signal is active LOW.

3.510/100 Line Interface Signals

Table 3.6 10/100 Line Interface Signals 32-QFN

SIGNAL	32-QFN
NAME	PIN #	TYPE	DESCRIPTION
TXP	29	AIO	Transmit/Receive Positive Channel 1.

SMSC LAN8710/LAN8710i	17	Revision 1.0 (04-15-09)
	DATASHEET