Snapper 1691998, 1691810 manual Tolerance

		TORQUE SPECIFICATIONS FOR
	STANDARD MACHINE HARDWARE
			TOLERANCE			+200/o
SIZE	SAEGRADE #2				SAEGRADE A15				SAEGRADE #8
		0				Q		8.
	InJLbs.			In./Lbs.					InAbs.
	Ft.lLbs.		N m .	Ft./Lb.s.			Nm.	Ft.Rbs.		Nm.
8-32	1 9		2.1		30	3.4		41		4.6
8 - 3 6	2 0		2.3		31	3.5		43		4.9
lo-24	2 7		3.1		43	4.9		60		6.8
lo-32	3 1		3.5	-	49	5.5		68		7.7
l/4-20	6 6		7.6		8	-		12		16.3
						10.9
l/4-28	7 6		8.6		10	13.6		14		19.
5116-18	11		15.		17	23.1		25		34.
5116-24	12	,,	16.3		19	25.8		25		34.
318-16	,20		27.2		30	40.8		45		61.2
318-24	' 2 3		31.3		35	47.6		50		68.
7116-14	3 0		40.8		50	.68.		' 70		95.2
7116-20	3 5		47.6		55	74.8		80		108.8
l/2-13	5 0		6 8 .		75	102.		110		149.6
112-20	5 5		74.8		90	122.4			120 i	163.2
9116-12	6 5		83.4	110		149.8		150'		204.
9116-18	7 5		102.,	120		163.2		170		231.2
518-11	9 0		122.4	150		204.		220		299.2
518-18	100		136.	180		244.8		240		, 326.4
314-10	160		2 1 7 . 6	260		353.6		386		525.
3/4-16	180		2 4 4 . 8	300		408.		420		571.2
718-g	140		190.4	400		544.		600		816.
718-14	155		2 1 0 . 8	440		598.4		660		897.6
1-8	2 2 0		2 9 9 . 2	580		788.8		900		1,224.
1-12	2 4 0		3 2 6 . 4	640		870.4		1,000		1,360.

NOTE:

1.These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

..::::,,	2. Recommended seating torque values for locknuts:
	a. For prevailing torque locknuts- use65% of grade 5
	torques.
	b.Forflange whizlock nuts(andscrews) -usa 135%
	of grade,5 torques.

3.Unless otherwise noted on assembly drawings all torque values must meet this specification.

BOLTHEADMARKING

S.A.E.GRADE:

20