c. Place mower in low cut position. Raise the flap (A, figure 12) and push on the belt retainer (E) to obtain slack in the belt. Install the blower drive belt (D) in the top groove of the pulley(B).
Figure 12
A. Flap
6. Pulley
c. Ben\ D. Drive Belt
E. Belt Retainer
d. Rotate the pivoting cover (A, figure 13) into place and attach the hook (B) to the clip (C) on the housing.
Figure 13.
k pdley Cover 9. Hook
C. Clip
D. Wing Nut
7
