Features & Controls

CONTROL FUNCTIONS

The information below briefly describes the function of individual controls. Operating the tractor and attachment requires the combined use of these controls and additional controls whose operation is described in the tractor Operator’s Manual.

Please take a moment and familiarize yourself with the name, location, and function of these controls so that you will better understand the safety and operating instructions provided in this manual.

D

B

A

 

E

 

Figure 1. Control Locations

 

A. Spout Rotator Switch

 

B. PTO Switch

E

C. Manual Lift

D.Deflector Lock Knob

E.Throttle Control

A. Electric Spout Rotator Switch

Controls the electric spout rotator.

B. PTO Switch

Engages and disengages the PTO to start and stop the snowthrower.

C. Manual Attachment Lift Lever

The attachment lift lever raises and lowers the attach- ment. To RAISE an attachment, depress the release button on top of the lever and pull back. To LOWER an attachment, depress the release button and move the lever forward. When lowering the attachment, be sure to push the lever fully forward into the locked position.

D. Deflector Lock Knob

The snowthrower discharge deflector angle can be changed by loosening the lock knob, changing the deflector angle and tightening the lock knob.

E. Throttle Control

Always operate at FULL throttle.

TRACTOR CONTROLS

Before you begin operating the tractor and attachment, make certain you have:

Read and understood the instructions in the tractor Operator’s Manual.

Become thoroughly familiar with all of the trac- tor controls and their operation, including how to safely and properly start and stop the unit.

Practice driving in an open area, without the attachment, to become accustomed to the unit.

6

Page 8
Image 8
Snapper 42 Single-Stage Snowthrower manual Control Functions