Operation

Check Tire Pressures

Tire pressure should be checked periodically, and maintained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

Tire

Pressure

Fits Models:

 

 

psi

bar

 

 

Rear

15

1,03

All

Figure 1. Checking Tire Pressure

Front

25

1,72

Models with pneumatic tires

 

Front

N/A

Models with flat free tires

 

Seat Adjustment

 

A

 

 

 

See Figure 2. The seat can be adjusted forward and

 

 

 

 

 

 

 

backward. Move the lever towards the left, position

 

 

 

 

the seat as desired, and release the lever to lock the

 

 

 

 

seat into position.

Reproduction

 

 

 

 

 

 

Not

for

 

 

 

 

Fig re 2.

Seat Adjustment

 

 

 

 

 

 

 

 

A. Seat Adjustment Lever

 

 

Mowing Height Adjustment

 

 

 

 

 

The cutting height adjustment pin (A, Figure 3) cont ol

 

 

 

the mower cutting height. The cutting h ight is

 

 

A

C

adjustable between 1-3/4” (4,4 cm) and 5” (12,7 cm)

 

 

 

 

 

in 1/4” (0,64 cm) increments.

 

 

 

 

 

1. Depress the deck lift foot pedal (B) until it locks

 

B

 

 

into the 5” (12,7 cm) position.

 

 

 

 

 

2. Place the cutting height adjustment pin in the

 

 

 

 

desired cutting height.

 

 

 

 

 

3.Depress the deck lift foot pedal then push the lock lever (C) toward the right to release the lock.

4.Release the deck lift foot pedal until it comes to rest against the cutting height adjustment pin.

Figure 3. Mowing Height Adjustment

A. Cutting Height Adjustment Pin

B. Deck Lift Foot Pedal

C. Deck Lift Lock lever

16

www.SnapperPro.com