|
|
|
|
| Troubleshooting |
Troubleshooting Common Cutting Problems |
|
| |||
Problem | Cause |
| Remedy | ||
Streaking | Blades are not sharp. |
| Sharpen your blades. | ||
| Blades are worn down too far. | Replace your blades. | |||
| Engine speed is too slow. | Always mow at FULL throttle. | |||
| Ground speed is too fast. | Slow down. | |||
| Deck is plugged with grass. | Clean out the mower. | |||
| Not overlapping cutting rows enough. | Overlap your cutting rows. | |||
| Not overlapping enough when | When turning your effective cutting width | |||
| turning. |
| |||
Scalping | Lawn is uneven or bumpy. | Roll or level the lawn. | |||
| Mower deck cutting height is set too | Raise the cutting height. | |||
| low. |
|
|
| |
| Ground speed is too fast. | Slow down. | |||
| Deck is not levelled correctly. | Correctly level the deck. | |||
| Tire pressure is low or uneven. | Check and inflate the tires. | |||
Stepped Cutting | Deck is not levelled correctly. | Level the deck correctly. | |||
| Reproduction | ||||
| Tires are not properly inflated. | Check a | d i flate the tires. | ||
|
| for | Replace the blades. | ||
| Blades are damaged. |
| |||
| Deck shell is damaged. | Repa r | r replace the deck. | ||
| Mower spindle is bent | r l se. | Repa r | r replace the spindle. | |
| Blades are not ins alled corre tly. | Re nstall the blades correctly. | |||
Uneven Cutting | NotDeck is not levelled c | rrectly. | Level the deck correctly. | ||
| Blades are dull or wo n. | Sharpen or replace your blades. | |||
| Blades are damaged. |
| Replace the blades. | ||
| D | ck is clogg d with grass clippings. | Clean out the deck. | ||
| D | ck sh ll is damaged. | Repair or replace the deck. | ||
| Mower spindle is bent or loose. | Repair or replace the spindle. | |||
| Blades are installed correctly. | Reinstall the blades correctly. | |||
| Tires are not properly inflated. | Check and inflate the tires. | |||
Stingers | Blades are not sharp or nicked. | Sharpen your blades. | |||
| Blades are worn down too far. | Replace your blades. | |||
| Engine speed is too low. | Always mow at full throttle. | |||
| Ground speed is too fast. | Slow down. | |||
| Deck is plugged with grass. | Clean out the mower. |
45