Snapper INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT, & LATCH, INSPECT BUCKLE, BEFORE EACH USE, INSPECT WEBBING

Operator Safety

WARNING

Failure to properly inspect and maintain the seat belt can cause serious injury or death.

INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT

•The seat belt like the ROLL BAR, needs to be periodically inspected to verify that the integrity has not been compromised through normal machine use, misuse, age degradation, modifications, or a roll over. If the seat belt does not pass all of the following tests, it should be replaced.

•BEFORE EACH USE – Conduct the following inspections/maintenance of the seat belt and retraction mechanism:

INSPECT BUCKLE

& LATCH

INSPECT WEBBING

1)Check for dirt or debris in the retraction mechanism. If dirt or debris is found, it should be removed.

2)Check to make sure the retraction mechanism

retracts easily and completely.Reproductionfor

3)Check for damage to any part of the seat belt such as nicks, cuts, loose stitching, or fraying.

4)Check that the buckle and latchNotopera e properly and that the latch plate is not excessively worn, deformed, or the buckle is damaged or cracked. The seat belt sh uld latch and release easily.

10