Operation
! | WARNING | ! |
DO NOT leave the machine with the engine running. STOP Blade. STOP engine. Shift to neutral and engage park brake. Remove key.
Mower Blade
1.Stop the mower blade by releasing the blade pedals (A, Figure 15) or moving the blade lever (B) rearward to the “OFF” position.
B
Stopping - Engine,
Wheel Drive, Blade
Engine
1.Stop the engine by turning the key (A, Figure 13) to the “OFF” position.
A |
Figu 15: St ppi g the mower blade
A
|
|
|
| ! | WARNING | ! | |
|
|
|
| Once blade is disengaged, it should come to a complete | |||
|
|
|
| stop in 3 seconds or less. If the blade continues to rotate | |||
| Figure 13: Turning key to ‘Off’ |
|
| after 3 seconds, the blade brake must be adjusted. Refer to | |||
|
|
|
| Section “BLADE BRAKE ADJUSTMENT” for adjustment |
| ||
Wheel Drive |
|
| proce | ures or return machine to an authorized dealer for | |||
|
| adjustment. DO NOT CONTINUE to operate machine until | |||||
1. Stop motion of the Rear Engine Rider by pushing the | |||||||
blade brake is adjusted and functioning properly. |
| ||||||
| clutch/brake pedal (A, Figure 14) all the way down to |
| |||||
|
|
|
| ||||
|
|
| |||||
| apply the brake. |
|
|
|
|
| |
|
|
|
|
|
|
| |
|
| A |
|
|
|
| |
|
| Reproduction |
| ||||
|
|
|
|
|
|
| |
Figure 14: Engaging the clutch/brake pedal
14 | www.snapper.com |
