Snapper 7800787, 7800785, 7800784, 7800786 manual Battery Charging, Battery Storage, Maintenance

Maintenance

Battery Charging

A.Place the battery in a well-ventilated area.

B.Connect a 12-volt constant-voltagebattery charger to the battery terminals; RED to positive (+) and BLACK to negative (-) terminal.

C.Charge the battery for 2 to 4 hours.

! WARNING !

The battery on this unit requires the use of a constant voltage (CV) battery charger designed for valve regulated (sealed) non-spillable batteries. Attempting to use a standard battery charger may result in damage to the battery. DO NOT use “BOOST” chargers on the battery. DO NOT attempt to charge the battery while installed on the unit.

Battery Storage

and stored.

If the mower is to be stored out of seasonReproductionon its rear bumper, it is recommended the battery be removed, charged

1. Remove the battery. Refer to the section entitled

“BATTERY REMOVAL”.

2. Charge the battery. Refer to the section entitled

“BATTERY CHARGING”.

3. Store the battery in an area away from the rider a wood surface. DO NOT STORE THE BATTERY ON A CONCRETE SURFACE.

31