4 | Setup for Windows XP This chapter explains how to install and use the Cordless Hand Scanner
(CHS) with a Bluetooth enabled computer running Windows XP.
Setup Summary
STEP 1: Install batteries and attach tether.
STEP 2: Charge the scanner.
STEP 3: Uninstall other scanning software.
STEP 4: Install the software.
STEP 5: Connect scanner to computer via Bluetooth.
STEP 6: Configure scanner settings.
STEP 7: Scan data into your application.
OPTIONAL:
• Assign sound and prefix/suffixes.
• Assign a trigger button.
• Select symbologies.
STEP 1: Install Batteries and Attach Tether
1. Use a coin or screwdriver to unlock and remove the battery cover. Turn
the lock underneath the scanner to a horizontal position. Remove the
casing.
2. Install the batteries in opposite directions, as indicated by the positive
symbols.
WARNING: Do not install the batteries incorrectly.
Damage may result.
3. If desired, attach the tether. Wrap the string loop around the inside part
of the lock.
4. Replace the battery cover and lock it into place.
5. If desired, attach the tether to a lanyard or belt.
CHAPTER 4: SETUP FOR WINDOWS XP 39