Status Indicator LED
LED LED Activity Meaning
1 blink per second Bluetooth radio is on, but not
connected.
Bluetooth
Status
(Blue)
1 blink per 5 seconds Bluetooth radio is on, connection
established.
Good Read
(Green)
Green Data successfully scanned and
transmitted to host device.
1 blink per second Less than 20% of battery life
remaining.
Solid red Batteries are charging.
Battery
Status
(Red) Off when connected
to charger Batteries are fully charged.
Status Indicator Beeps
The scanner beeps to signal the Bluetooth connection status. Optionally,
you can also set the scanner to beep every time it successfully scans data
and transmits it to the host device.
LED Beep Pattern Meaning
1 beep Connection to host device has begun.
Bluetooth
Status
(Blue)
2 beeps Connection to host device has ended.
Good Read
(Green)
1 beep Data was successfully scanned and
transmitted to host device.
Touch Screen Stylus
The touch screen stylus in the tail of the CHS can be removed with small
pliers if desired. Visit the Socket website to purchase replacement styli.
WARNING: Do not use the stylus if damaged. A damaged
stylus may scratch the display screen of your computer.
The stylus does not work with XP Tablet computers using
Active Matrix displays.
CHAPTER 1: INTRODUCTION 9