After you configure the correct Bluetooth hardware settings in
SocketScan, the Connect CHS menu option allows you to
connect to the CHS directly from SocketScan, instead of
manually connecting via your Bluetooth software.
The Connect CHS option will not appear unless you checked the
box Enable CHS Support in the SocketScanXP settings.
SocketScan will not be able to connect to the CHS if you have
another device assigned as your favorite or default Bluetooth
serial device. If needed, remove any such settings.
9. The task tray icon at the bottom of your screen will change to
indicate that SocketScan has detected (i.e., is connected to) the
CHS. The icon will show an image of the scanner.
CHAPTER 4: SETUP FOR WINDOWS XP 51