STEP 5: Connect Scanner to Computer via Bluetooth The very first time you connect the CHS to your computer, you must
manually connect via your Bluetooth software. Afterwards, you will be
able to connect directly from SocketScan by right-clicking on the
SocketScan icon and selecting Connect CHS. If desired, you can also
configure the devices to automatically connect whenever within range.
1. Turn on the Cordless Hand Scanner. Press the small power button for
five seconds, until you see the LED turn blue. The LED should blink
blue once every second to show that the Bluetooth radio is on but not
connected. If the LED begins blinking red, the battery needs to be
recharged.
\
For more information about the LEDs and beeps, please
refer to page 9.
CHAPTER 4: SETUP FOR WINDOWS XP 43