2 Setup for Windows Mobile

This chapter explains how to install and use the Cordless Hand Scanner (CHS) with a Bluetooth enabled Pocket PC 2003.

Setup Summary

STEP 1: Install batteries and attach tether.

STEP 2: Charge the scanner.

STEP 3: Uninstall other scanning software.

STEP 4: Install the software.

STEP 5: Configure scanner settings.

STEP 6: Connect scanner to Pocket PC via Bluetooth.

STEP 7: Scan data into your application.

OPTIONAL:

•Select symbologies.

•Configure prefix/suffixes.

•Run Scan Demo application.

•Configure automatic connections.

STEP 1: Install Batteries and Attach Tether

1.Use a coin or screwdriver to unlock and remove the battery cover. Turn the lock underneath the scanner to a horizontal position. Remove the casing.

2.Install the batteries in opposite directions, as indicated by the positive symbols.

WARNING: Do not install the batteries incorrectly.

Damage may result.

3.If desired, attach the tether. Wrap the string loop around the inside part of the lock.

4.Replace the battery cover and lock it into place.

5.If desired, attach the tether to a lanyard or belt.

10