Status Indicator LED
| LED | LED Activity | Meaning | |
|
|
| 1 blink per second | Bluetooth radio is on, but not |
| Bluetooth |
| connected. | |
|
|
| ||
| Status |
|
| Bluetooth radio is on, connection |
| (Blue) |
| 1 blink per 5 seconds | |
|
| established. | ||
|
|
|
| |
|
|
|
|
|
| Good Read | Green | Data successfully scanned and | |
| (Green) | transmitted to host device. | ||
|
| |||
|
|
|
|
|
|
|
| 1 blink per second | Less than 20% of battery life |
| Battery |
| remaining. | |
|
|
| ||
| Status |
| Solid red | Batteries are charging. |
| (Red) |
| ||
|
|
|
| |
|
| Off when connected | Batteries are fully charged. | |
|
|
| ||
|
|
| to charger | |
|
|
|
| |
|
|
|
|
|
Status Indicator Beeps
The scanner beeps to signal the Bluetooth connection status. Optionally, you can also set the scanner to beep every time it successfully scans data and transmits it to the host device.
LED | Beep Pattern | Meaning | |
Bluetooth | 1 beep | Connection to host device has begun. | |
Status |
|
| |
|
| ||
(Blue) | 2 beeps | Connection to host device has ended. | |
| |||
|
|
| |
Good Read | 1 beep | Data was successfully scanned and | |
(Green) | transmitted to host device. | ||
| |||
|
|
|
Touch Screen Stylus
The touch screen stylus in the tail of the CHS can be removed with small pliers if desired. Visit the Socket website to purchase replacement styli.
WARNING: Do not use the stylus if damaged. A damaged stylus may scratch the display screen of your computer.
The stylus does not work with XP Tablet computers using
Active Matrix displays.
CHAPTER 1: INTRODUCTION | 9 |