Socket Mobile Cordless Hand Scanner STEP 5: Connect Scanner to Computer via Bluetooth

STEP 5: Connect Scanner to Computer via Bluetooth

The very first time you connect the CHS to your computer, you must manually connect via your Bluetooth software. Afterwards, you will be able to connect directly from SocketScan by right-clicking on the SocketScan icon and selecting Connect CHS. If desired, you can also configure the devices to automatically connect whenever within range.

1.Turn on the Cordless Hand Scanner. Press the small power button for five seconds, until you see the LED turn blue. The LED should blink blue once every second to show that the Bluetooth radio is on but not connected. If the LED begins blinking red, the battery needs to be

recharged.

\

For more information about the LEDs and beeps, please refer to page 9.

CHAPTER 4: SETUP FOR WINDOWS XP 43