Socket Mobile Cordless Hand Scanner STEP 5: Connect Scanner to PDA via Bluetooth

STEP 5: Connect Scanner to PDA via Bluetooth

1.Turn on the Cordless Hand Scanner. Press the small power button for five seconds, until you see the LED turn blue. The LED should blink blue once every second to show that the Bluetooth radio is on but not connected. If the LED begins blinking red, the battery needs to be recharged.

2.Start SocketScan. Tap Home. In the upper right corner, make sure All is selected. Scroll down and tap on the SocketScan icon.

3.The main screen of SocketScan will appear, showing a picture of the Socket SDIO In-Hand Scan Card. In the Scanner Device drop-down menu, select Bluetooth CHS.

4.The screen will display a picture of the Cordless Hand Scanner. In the

Device is field, tap Enabled.

CHAPTER 3: SETUP FOR PALM 31