•Good read indication on CHS: Select how you would like the scanner to indicate that data has been successfully scanned and transmitted to the host device. (This is separate from good read indications from the computer, which are configured in the General screen).
−Beep: If you would like the CHS to beep to indicate good reads, indicate the frequency. If using the CHS in a noisy environment, you may want to adjust the frequency as needed.
The delay in the ‘good scan’ beep increases with the distance from the host, giving the user valuable feedback about the signal strength of the connection
−Flash green LED: Check if you would like the CHS to flash a green LED to indicate good reads.
•Auto
−Max attempts: Indicate how many times you would like your computer to attempt to
−Time limit per attempt: Indicate how long you would like each re- connection attempt to last.
•Power management: By default, the CHS will turn off if 20 minutes have passed without any Bluetooth connection. Check the Disable CHS Auto Power Off mode box to have the CHS remain on even when 20 minutes have elapsed without a Bluetooth connection.
6.After modifying any settings, click OK.
7.As prompted, exit and restart SocketScan to have the changes take effect.
8.
Connect CHS.
50