Soehnle 9220 Getting Started, Power supply, Plug-in power supply unit, Technical data, English

BA_9220_D_GB_F_E_P_I.qxd 24.02.2005 13:56 Seite 11

ENGLISH

Getting Started

Unpack all parts:

• Scale

•Platform

•Plug-in power supply unit

•Calibration weight

1. Mount the platform.

2.Set up the scales at the point of application.

3.Align the scale horizontally using the adjusting feet and

spirit level.

4. Connect the plug-in power supply unit. During the charging cycle, an LED is lit on the display unit.

5. The scale is ready for operation.

The readings stabilise after a brief warm-up period of 30 minutes after switching on the unit. Carefully place the item to be weighed on the platform. Do not keep any loads per- manently on the platform. Avoid impacts and do not exceed the specified maximum load. This could damage the scale.

Prior to use, check with the reference weight whether the scale is calibrated in accordance with the on-site conditions. If necessary, recalibrate the scale as described in the section on 'Calibration' .

	Power supply
	The scale can be operated using the plug-in power supply
	unit or the built-in battery. The battery can be recharged
	using the plug-in power supply unit. Dispose of used
PB	(rechargeable) batteries in accordance with the national and
	local regulations for environmental protection and recycling.

Plug-in power supply unit

The power supply unit is not waterproof and therefore must not come into contact with water.

Should the power supply unit become wet or show visible signs of damage, do not operate the scale with the power supply unit. Please contact your dealer or service partner.

Technical data

Weighing range:	3 kg / 6 kg / 30 kg
Weighing accuracy:	0,1 g / 0,2 g / 1 g

Smallest parts weight: 0.08 g / 0.16 g / 0.8 g

Working temperature: 0° - 40°C

Storage temperature: -10° - 55°C

The power supply data is given on the plug-in power supply unit.

11