BA_9220_D_GB_F_E_P_I.qxd 24.02.2005 13:57 Seite 14
ENGLISH
Counting
1. If piece weight is unknown
Press the 
key . 
Count out the required number of pieces and place them on the platform. 
When the display is stable, the total weight of the reference parts, the piece weight and the number of parts on the scale are displayed.
You can now count further quantities of this part by placing them on the platform.
2. If piece weight is known (manual input)
Enter a known piece weight using the numeric keypad.
Acknowledge by pressing the 
key as long as the value is flashing.
The parts to be counted can now be placed on the scale. The display shows the total weight, piece weight and total piece count.
If samples are too light for a clear result, the message " LIGHT SAMPLE" begins to flash.
To switch to weigh mode press the 
key an then 
key 2x.
Alarm function
An acoustic signal sounds when a
Determine the piece weight as described above.
Press the 
key.
Enter the value 100 with the numeric keypad.
Press the 
key again.
A signal sounds after 100 pieces are counted.
To deactivate the alarm function, press the 
key, then
the key, then the 
key again.
Totalizing function
After determining a piece count, press the 
key. The displayed piece count and weight are set to "0". An arrow sign points to "M+", indicating that a value is stored in the memory. Determine the next piece count. Press the 
key again, and so forth
The total can be displayed by pressing the 
key.
Clear the memory with the 
key.
14
