ENGLISH

On/Off switch

Power-on

Only when the scale is not loaded.

After the test routine, the display is set to zero. The scale is ready for use.

Place the weighing product on the scale. The display shows the gross weight.

The measured values stabilise after a short warm-up peri- od of 15 minutes after power-on. Place the weighing pro- duct carefully on the scale. Do not keep any loads perma- nently on the platform.

Avoid shocks and loading the scale beyond the specified maximum load. These could damage the scale.

Zero

If zero is not indicated when the scale is unloaded, press

the key. Possible zero range -4 % ... +4 % of the weighing range.

Tare weighing

Place a container on the platform. The weight and

GROSS appear in the display. Press the key. The display is reset to zero and NET is indicated. Place the weighing product on the scale. After the display settles, the net weight of the weighing product is displayed.

Clear tare

When the scale is empty, press the key again. The display changes from the negative value to zero and GROSS is displayed

Hold function

If the environment or the weighing product (e.g. small ani- mal) does not come to rest, you can freeze the displayed

weight value by pressing the key.

Hold appears in the display. The Hold function can be

cancelled by pressing the key again.

Charging the battery

If the "Battery almost empty" message appears in the display, the scale can be operated for approx. 10 hrs, after which it shuts down automatically in order to protect the battery. To charge the battery, connect the power adapter. Recommended charging time 12 hrs.

During the charging process, an LED lights up. Red = battery almost empty

Yellow= medium charge Green= battery charged

10

Page 10
Image 10
Soehnle 9240 manual Power-on, Zero, Tare weighing, Clear tare, Hold function, Charging the battery