Soleus Air KC-30H / KC-35H Installation Requirements, Tools and Parts, Location Requirements

Models: KC-30H / KC-35H

1 22
Download 22 pages 16.18 Kb
Page 7
Image 7
INSTALLATION REQUIREMENTS
Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:

Do not use an extension cord.

Unplug air conditioner before servicing.

Use two or more people to move and install air conditioner.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Needed

Flat-blade and Phillips

Tape measure

 

screwdrivers

Drill and ³⁄₁₆" or smaller bit

 

Level

 

 

Through-the-wall installation:

In addition to the tools listed above, the following tools are needed for though-the-wall installation.

Saw

1" (2.5 cm) or thicker

Wood preservative

 

lumber

 

7 - #10 x 1" wood screws

Caulk

 

 

Parts supplied (on some models)

Check that all parts are included in parts package.

 

B

A

 

 

H

C D E F

 

G

 

 

I

A. Foam window sash seal

E. #10 x ³⁄₄" round-head screws (6)

B. Window lock brackets (2)

F. #10 x 1/2" pan-head Phillips

C. #10 x ¹⁄₄" pan-head Phillips

screws (3)

screws (6)

G. Top channel

D. #10 x ³⁄₈" pan-head

H. Side curtains (2)

Phillips screws (3)

I. Foam seal

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Check the location where air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation.

The location should provide:

Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner.

NOTE: Do not use an extension cord.

Free movement of air in room to be cooled.

A large enough opening for the air conditioner.

Adequate wall support for weight of air conditioner. Air conditioner weighs between 94 and 103 lbs (43 to 47 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able to pass freely through the cabinet louvers.

A

A. Cabinet louvers

NOTE: Installation parts are supplied for double-hung windows up to 40" (101.6 cm) wide. A special Wide Window Kit is available from your dealer or service center. See “Accessories.”

5

Page 7
Image 7
Soleus Air KC-30H / KC-35H installation manual Installation Requirements, Tools and Parts, Location Requirements, C D E F