Installation instructions
3. Wiring connection
•Remove the electrical cover of outdoor unit (1 screw).
•Connect wires as shown below in the illustrations.
Outdoor unit terminal block
Heat Pump
Connect to Power Supply | Power supply inter connecting |
| conductors (in conduit A) |
| ( to the indoor unit) |
| Control inter connecting |
| conductors(in conduit B) |
| ( to the indoor unit) |
The conduit should not be loosened after being fixed, otherwise, it may cause abnormal noise when the unit is running.
Number 14 wire should be used for
Number 12 wire should be used for
Number 14 wire should be used for
Number 16 wire should be used for
- 22 -
