SonicWALL TZ 180 Verify WAN / LAN Connection, Configuring DHCP IP Addressing section, on page

Verify WAN / LAN Connection

Once the cables are correctly connected, the WAN and LAN (1) lights on the front panel of your SonicWALL TZ 180 illuminate as illustrated below:

Link/ACT (WAN / LAN 1) - A solid light Indicates a network connection is present between the SonicWALL TZ 180 and another network appliance. A blinking light indicates connection activity.

10/100 (WAN / LAN 1) - A green light Indicates a 10 Mbps port connection. An amber light indicates a 100 Mbps port connection.

Note: In order to connect to the SonicWALL TZ 180, your computer must be set to accept dynamic “DHCP” addressing. For more information on configuring DHCP, turn to Appendix A:

Configuring DHCP IP Addressing section, on page 25.

Page 14 Verify WAN / LAN Connection