Location and Function of Parts
Overview 1 Chapter
Notes
•The command mode of the supplied Remote commander is set to VTR4. You cannot change this setting.
•Set [REMOTE CTRL] on the [OTHERS] menu to [ON] to enable the Remote Commander to control the unit.
•In addition to the Remote Commander supplied with the unit, the unit accepts signals from any Sony Remote Commander whose command mode is set to VTR4. If you want to disable the control from any Remote Commander, set [REMOTE CTRL] on the [OTHERS] menu to [OFF].
Battery installation
1 Push and slide the lid to open.
2 Install two size AA (R6) batteries (supplied) with the correct polarity.
Be sure to install the battery from the # side.
Notes on batteries
•Make sure that the battery orientation is correct when inserting batteries.
•Do not mix an old battery with a new one, or mix different types of batteries.
•If you do not intend to use the Remote Commander for a long time, remove the batteries to avoid damage from battery leakage. If the batteries have leaked, remove them, wipe the battery compartment dry and replace the batteries with new ones.
To remove the batteries
Remove the lid as step 1 and take out the batteries.
3 Replace the lid.
18 Chapter 1 Overview