To cancel the time code setting
Select [CANCEL] in step 7, then press the EXEC button.
To reset the time code
Select [RESET] in step 4, then press the EXEC button.
To set the value of the user bits
You can set the user bits as
1 Press the MENU button to display the menu.
AUDIO SET
AUDIO MONI
AUDIO MIX
AUDIO MODE
AUDIO LOCK
AUDIO LIMIT
[ MENU ] : END
2 Press the f/F buttons to select [TC/UB SET], then press the EXEC button.
TC/ UB SET
RETURN
TC PRESET00:00:00:00
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB TIME REC
[ MENU ] : END
3 Press the f/F buttons to select [UB PRESET], then press the EXEC button.
UB PRESET
RETURN
PRESET00 00 00 00
RESET
[ MENU ] : CANCEL
4 Press the f/F buttons to select [PRESET], then press the EXEC button.
UB PRESET |
|
|
RETURN |
|
|
PRESET | 00 | 00 00 00 |
RESET |
|
|
[ MENU ] : CANCEL
5 Set the first two digits. Press the f/F buttons to select the number, then press the EXEC button.
6 Repeat step 5 to set the other digits.
7 Press the f/F buttons to select [OK], then press the EXEC button.
The user bits are set.
8 Press the f/F buttons to select [OK], then press the EXEC button.
The menu display returns to that of step 2.
To cancel the user bits setting
Select [CANCEL] in step 7, then press the EXEC button.
To reset the user bits
Select [RESET] in step 4, then press the EXEC button.
To set the user bit to the real time clock
Select the [TC/UB SET] menu, [UB TIME REC], then [ON].
Note
The user bit time display is recorded at
To set the time code when the recording starts
Set [TC MAKE] on the [TC/UB SET] menu to select the time code to be recorded when recording starts.
REGENERATE: The time code value is set to continue the time code from the time code already recorded on the tape. If you start recording from a blank portion of the tape, the time code starts from 00:00:00:00.
PRESET: The time code starts from the value set in [TC PRESET] on the [TC/UB SET] menu.
Dubbing/Editing 3 Chapter
Chapter 3 Dubbing/Editing | 41 |