Dubbing/Editing 3 Chapter
Dubbing to another equipment
Notes
•If you output pictures in the playback pause mode when connected with an i.LINK cable, recorded images may appear grainy.
•When video signals in the HDV format is played back, you cannot output pictures in the playback pause mode or played back at various speeds other
than normal via the HDV/DV jack.
•When connected with an i.LINK cable, you cannot output only pictures or sounds separately.
To video equipment without an i.LINK jack
When connecting this unit to a recorder without an i.LINK jack, connect the two devices as shown below. Set [COMPONENT] and [DOWN CONVERT] (p. 49) corresponded to the signals you wish to output.
| Monitor |
Recorder | Rear view of the player |
(this unit) |
Audio input
Component video input
Video input
Audio cable (Phono jack) (not supplied)
Component video cable (not supplied)
Video cable (not supplied)
: Signal flow
Notes
•Refer also to the Notes on page 26.
•The audio output signal will comply with the setting of [AUDIO MIX] of the [AUDIO SET] menu.
36 | Chapter 3 Dubbing/Editing |