Sony 1080i manual 49

Icon/Menu Submenu Setting

IN/OUT REC REC MODE Switches the recording mode between DVCAM and DV (SP mode only). DVCAM : Records in DVCAM format.

DV SP : Records in DV format (SP mode).

Note

You cannot change the setting during recording.

COMPONENT Select the mode of the video output from the COMPONENT OUT jacks in accordance with (page 15, 26) the equipment to be connected.

Select [480i], [480p/480i] or [1080i/480i] when [50i/60i SEL] on the [OTHERS] menu is set to 60i.

Select [576i], [576p/576i] or [1080i/576i] when [50i/60i SEL] on the [OTHERS] menu is set to 50i.

	Note
	When [480p/480i] or [576p/576i] is selected during your playback of HDV images, you
	cannot output signals from S VIDEO or VIDEO OUT jacks. Also, when [HDVtDV CONV]
	of [i.LINK CONV] is set to [ON], HDV images are not output from HDV/DV jack either.
i.LINK CONV	This setting is valid when [VCR HDV/DV] is set to [AUTO] or [HDV].
(page 25, 35, HDVtDV CONV
38, 39)		OFF	: Select to output the signals from the HDV/DV jack in accordance with the [VCR
		HDV/DV] setting.
		ON : Select to output the signals in the DV format the HDV/DV jack.
	AUDIO LOCK
	The setting is effect only when [HDVtDV CONV] is set to [ON].
		LOCK MODE			: Signals which sampling clock for audio and that for video are
		synchronized are output from the HDV/DV jack.
		UNLOCK MODE : Signals which sampling clock for audio is separate from that of video
		are output from the HDV/DV jack.
	Notes
	• Refer to setting of [VCR HDV/DV] on input through the i.LINK jack.
	• Before changing the setting, be sure to disconnect the i.LINK cable. If an i.LINK cable is
		connected when you change the setting, the video equipment may not be able to
		recognize the signal correctly.
	• You cannot convert an image in HDV format into the DVCAM format.
DOWN	Set the video signal output format for playing back a tape recorded in the HDV format or
CONVERT
	through i.LINK input.
	This menu is valid for the following outputs.
		– COMPONENT OUT (during 480i and 576i signal output)
		– S VIDEO OUT
		– VIDEO OUT
		– i.LINK output (when [HDVtDV CONV] of [i.LINK CONV] is set to [ON])
		SQUEEZE		: This mode maintains the vertical screen size while compressing the
		horizontal		screen size. The video display is vertically long.
		LETTER BOX : This mode compresses both horizontal and vertical screen sizes to play
		back the video without losing the vertical and horizontal size ratio.
		EDGE CROP : This mode maintains the vertical screen size and cuts off the left and right
		sides for playback.
	Note
	This setting is invalid for DVCAM/DV signals recorded in wide mode.

Menus Through Setting and Adjusting 4 Chapter

Chapter 4 Adjusting and Setting Through Menus 49