4b: Connecting the video components

How to connect your components

This section describes how to connect your video components to this receiver. Before you begin, see “Component to be connected” below for the pages which describe how to connect each component.

After connecting all your components, proceed to “5: Connecting the antennas (aerials)” (page 28).

Component to be connected

Component

Page

TV

19

 

 

With HDMI jack

23

 

 

DVD player

25

 

 

Satellite tuner/Set-top box

26

 

 

VCR, DVD recorder

27

 

 

Camcorder, video game, etc.

27

 

 

If you want to connect several digital components, but cannot find an unused input

See “Listening to digital sound from other inputs (DIGITAL ASSIGN)” (page 76).

Video input/output jack to be connected

The image quality depends on the connecting jack. See the illustration that follows. Select the connection according to the jacks on your components.

Digital Analog

High quality image

Notes

•Before connecting cords, be sure to disconnect the AC power cord.

•Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted.

22GB