Settings for the audio

(AUDIO menu)

You can use the AUDIO menu to make settings for the audio to suit your preference. Select “AUDIO” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 42) and “Overview of the menus” (page 43).

AUDIO menu parameters

xA/V SYNC (Synchronizes audio with video output)

Lets you delay the output of audio to minimize the time gap between audio output and visual display. You can adjust from 0 ms to 300 ms in 10 ms steps.

Notes

•This parameter is useful when you use a large LCD or plasma monitor or a projector.

•This parameter is not valid when ANALOG DIRECT is selected.

xDUAL MONO (Digital broadcast language selection)

Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.

•MAIN/SUB

Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously.

•MAIN

Sound of the main language will be output.

•SUB

Sound of the sub language will be output.

xDEC. PRIO. (Digital audio input decoding priority)

Lets you specify the input mode for the digital signal input to the HDMI IN jacks.

•DEC. AUTO

Automatically switches the input mode between DTS, Dolby Digital, or PCM.

•DEC. PCM

PCM signals are output from the connected player. To prevent interruption when playback starts, set to “DEC. PCM”. When signals other than PCM signals are received, set this item to “DEC. AUTO”.

Note

Even when “DEC. PRIO.” is set to “DEC. PCM”, the sound may be interrupted at the very beginning of the first track depending on the CD being played back.

xD. ASSIGN (Digital audio input assignment)

Lets you assign the digital audio input to other input source. For details, see “Listening to digital sound from other inputs (DIGITAL ASSIGN)” (page 76).

53GB

Operations Amplifier