Sony 3-289-450-45(1) Direct tuning, Using the controls on the receiver, In case of poor FM stereo reception

Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0

Press SHIFT.

Press D.TUNING.

4 Press the numeric buttons to enter the frequency.

1 Press TUNER repeatedly to select the FM or AM band.

You can also use INPUT SELECTOR on the receiver.

2 Press TUNING + or TUNING –.

Press TUNING + to scan from low to high; press TUNING – to scan from high to low.

The receiver stops scanning whenever a station is received.

Using the controls on the receiver

1Turn INPUT SELECTOR to select the FM or AM band.

2Press TUNING MODE repeatedly to select “AUTO”.

3Turn TUNING +/–.

In case of poor FM stereo reception

If the FM stereo reception is poor and “ST” flashes on the display, select monaural audio so that the sound will be less distorted.

•To select monaural audio, set “FM MODE” in TUNER menu to “MONO” (page 52).

•To return to stereo mode, set “FM MODE” in TUNER menu to “ST” (page 52).

Direct tuning

You can enter the frequency of a station directly by using the numeric buttons.

64GB