There is pop noise from a specific component connected to this receiver when you turn on the component.

•Check that the INPUT MODE is not set to “AUTO” for the selected input (page 75).

The left and right sounds are unbalanced or reversed.

•Check that the speakers and components are connected correctly and securely.

•Adjust the balance parameters using the LEVEL menu.

There is severe hum or noise.

•Check that the speakers and components are connected securely.

•Check that the connecting cords are away from a transformer or motor, and at least 3 meters away from a TV set or fluorescent light.

•Move your audio components away from the TV.

•The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.

There is no sound, or only a very low- level sound is heard from the center/ surround/surround back speakers.

•Select a CINEMA STUDIO EX mode (page 60).

•Adjust the speaker level (page 37).

•Make sure the center/surround speakers are set to either “SMALL” or “LARGE” (page 49).

•Check “SP PATTERN” setting (page 48).

There is no sound from the subwoofer.

•Check that the subwoofer is connected correctly and securely.

•Make sure you have turned on your subwoofer.

•Depending on the selected sound field, no sound output from the subwoofer.

•When all speakers are set to “LARGE” and “NEO6 CIN” or “NEO6 MUS” is selected, there is no sound from the subwoofer.

•Check “SP PATTERN” setting (page 48).

The surround effect cannot be obtained.

•Make sure the sound field function is on (press MOVIE or MUSIC).

•Sound fields do not function for signals with a sampling frequency of more than 48 kHz.

Dolby Digital or DTS multi channel sound is not reproduced.

•Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.

•When connecting the DVD player, etc., to the digital input jacks of this receiver, check the audio setting (the settings for the audio output) of the connected component.

Recording cannot be carried out.

•Check that the components are connected correctly.

•Select the source component using the input buttons (page 38).

There is no sound from the component connected to the DIGITAL MEDIA PORT adapter.

•Adjust the volume of this receiver.

•The DIGITAL MEDIA PORT adapter and/or component is not connected

correctly. Turn off the receiver, then reconnect the DIGITAL MEDIA PORT

adapter and/or component.

• Check the DIGITAL MEDIA PORT adapter and/or component device to make Additional sure it supports this receiver.

Information

continued

93GB